BA-50 CNC Profile Bender
BA-50 Flats 2-3/4" / Tube 2-1/2" / Solids 1-1/2"
FULL FEATURED, Hydraulic, Computer Controlled Ring Bending Machine

SPECIAL FEATURES Variable speed forming roll travel via "MOOG" servo-valve for immediate response and micro adjustments Switch-gear and secondary controls "SIEMENS" On line modem machine diagnostic routine Hydraulic system temperature maintained by integral air/oil cooler on automatic cycle Hydraulic and electronic circuit on timed protective automatic shut down "ENERGY SAVING MODE" Key switch security lock out RS-232 Serial Port for external connection of PC  "Automatic Interpolation" software to blend curve to curve or curve to straight program blocks "Auto Mirror Image" capability to reduce programming time by up to 75% "Graphic Imaging" to display final part shape per data input to facilitate operator input PLUS MANY MORE!!
	STANDARD FEATURES Industrial PC with 3.5” floppy drive for unlimited storage capability Rugged steel frame, normalized, produced on CNC machining centers Three driven shafts for optimum driving of the profile High strength steel shafts, heat treated and ground, drive components and shafts journaled in roller bearings Oil bath speed reducer and high efficiency  final drive with bi-directional TEFC electric motor Variable rotation speed using a motor converter and solid state electronic driver Hydraulic powered forming roll, guide block moving on hardened slide-ways with protective cover Hydraulic power unit with overload relief and P.O. non return valves, incorporated in the machine housing Dual lateral material guides, four way adjustable and heavily dimensioned Vertical and Horizontal operating positions with rests on isolating pads Low voltage controls on remote pulpit with push buttons,  heavy duty foot pedals and emergency stop Linear transducer and digital display for precise repeat positioning of the bending roll Coiling, pipe bending, wide flat bending and other special tooling available Operating and maintenance tools, instruction manual
Models BA-35 / 20 / 50 are Full CNC , FULL FEATURED, Ring Benders  with rolls driven by a sophisticated but easy to program computer numerical control system complete with hydraulic actuated forming roll, variable speed rotation, variable speed forming roll travel and built-in industrial PC with 3.5” floppy drive. These units are ideal for creating variable radii shapes, spirals, ovals, production bends, polycentric forms, etc. using most any material type and profile cross section.
Optional Equipment Personal Computer (PC) for  virtually endless programming capacity BPR Bending Program Special Rollers MATERIAL BA-50 Flats, Hard  2-3/4 x 1/2 Ø 20" Flats, Easy  4x5/8 Ø 14" Square Bar  1-1/2 Ø 24" Angle, Leg-out  2-1/4x1/4 Ø 30" Angle, Leg-in  2-1/4x1/4 Ø 38" Tee, Leg-out  2-1/2 Ø 20" Tee, Leg-in  2-1/2 Ø 20" C, Leg-out  3-3/4 Ø 26" C, Leg-in  3-3/4 Ø 30" Round Bar  1-1/2 Ø 24" Pipe, Sch. 40  2 Ø 36" Round Tube  2-12x10ga. Ø 34" Square Tube  2-1/4x1/8 Ø 50" Rect. Tube  2-3/4x1-1/2x1/8 Bending Adjustment Hydraulic Driven rolls 3 Rolling speed fpm 16 Working plane Vert./Horiz. Repeat control Auto-Repeat Installed power HP 4.75 Approx. dimensions 33 x 44 x 49 h Approx. Shipping wt. lbs. 1650

Chart indicates minimum suggested inside bending diameters at maximum section size using mild steel  - Specifications subject to change/modification without prior notice - Data is approximate - Contact your authorized dealer for specific tooling capabilities/requirements on shapes and sizes to be bent. Special rolls and/or tooling may be required for some angle, channel rolling and/or for serial production on some sections - Bending I.D.'s may be limited by predicted material distortion

Manufacturer and Eagle reserve the right to revise design, construction and specifications without prior notice. Transcription and clerical errors subject to correction. All images and text on this page are the property of Eagle Bending Machines, Inc. and may not be copied or used in any way without permission from Eagle Bending Machines, Inc.

EAGLE BENDING MACHINES, INC.  
 

Eagle Bending Machines, Inc. provides superior quality universal roll bending machines and other bending machines to the metal fabrication industry. Eagle is proud to provide; angle rolls, section benders, ring rollers, roll benders, CNC bending machines, bar bending machines, ornamental bending machines, scrolling units, manual scroll benders, scroll bending tooling, scroll benders, scroll tools, bar twisters, bar twisting tooling, picket twisters, picket twisting machines, powered picket twisters, cap rail benders, cap rail tooling, bronze cap rail benders, aluminum cap rail tools, spiral stair rail benders, spiral stair rail tools, ornamental and decorative metal working machines, tube benders, pipe benders, as well as tooling for all types of bending equipment.  We are exclusive supplier of Eagle Bending Machines. Look for our brand names, Eagle, Eagle/BPR, BPR Curvatrici.