|
|
Squaring Shears
Built-in Rigidity
Air Shears | Mechanical Shears |
Hydraulic Shears | Gap Style Foot Shears | Foot Shears | Special
Shears
Air Shears
Air Shears
 |
The power transfer mechanism sets the FAMCO Air Shear
apart; two powerful air cylinders connected to a common steel
torque tube deliver the full rated capacity. Solenoid air
valve is quickly actuated by convenient movable foot switch.
Features FAMCO quality construction, including all-steel,
box-type bed and end members for rugged, rigid support.
Installation is fast and easy: simply connect the air line and
plug the solenoid valve to any 115 volt AC outlet.
Available in 12GA; 14GA; and 16GA capacity, in cutting
widths from 24" to 84".
|
Air operated shears
These shears incorporate two heavy duty air cylinders, 4"
bore X 5" stroke. They provide simplicity and higher
production capability, along with ease of operation, through a
foot air valve.
16GA capacity in 36" & 52" widths
|
 |
Mechanical Shears
100B Series-Mechanical Shears
 |
Efficient performance makes this 190-strokes-per-minute
model the ideal choice for any operation within the stated
capacity. In every-day use or cut-to-length lines of lighter
materials,these shears offer the versatility of the solenoid
operated clutch and the quality construction found in every
FAMCO power shear. B Series shears feature an anti-friction
clutch and brake. The Orttech pneumatic clutch and brake are
trouble-free units, self-compensating for wear. This 360
degree engagement clutch provides instantaneous, accurate
shear operation assuring the consistent repetition essential
to effective cut-to-length lines and feed operations of all
kinds.
Available in 18GA; 16GA; and 14GA. capacities, in cutting
widths from 24" to 72".
|
WG Series-Mechanical Shears
"WG" Series Transmissions feature a silent worm gear, with
an anti-friction clutch and brake. The worm is part of the
one-piece clutch shaft for insure true rigidity. Worm and gear
rotate only during the cutting stroke - a fraction of the
total operation time of the shear. High torque pneumatic
friction clutch and brake are trouble-free units.
|
 |
W Series-Mechanical Shears
 |
The most modern design is incorporated in this rugged, big
capacity series of FAMCO squaring shears. Whether cutting to
capacity or very light gauge material, each cut is square and
accurate. Fast air clutch engagements and movable guarded
foot-switch control make the shears in this series ideal for
high production use.
Available in 10GA;3/16" & 1/4" capacities, in cutting
widths from 36" to 12ft.
|
HDW Series-Mechanical Shears
The most modern design is incorporated in this rugged, big
capacity series of FAMCO squaring shears. Whether cutting to
capacity or very light gauge material, each cut is square and
accurate. Fast air clutch engagements and movable guarded
foot-switch control make the shears in this series ideal for
high production use.
Available in 3/8" capacity, in 4ft to 12ft cutting widths
|
 |
Hydraulic Shears
 |
Designed for day after day cutting of all kinds of
material; these rugged, powerful shears, transfer power
through two heavy duty hydraulic cylinders connected to a
common steel torque tube. Solenoid operated four way hydraulic
valve is quickly actuated by convenient movable foot switch.
These shears feature FAMCO quality, all steel construction and
heavy duty hydraulic power units. Installation is fast and
easy; simply provide electrical power and you are ready for
production. Precise stroke control is provided through a limit
switch adjustment.
Available in 14GA; 10GA; 1/4" & 3/8" capacities; in 48" to
12ft cutting widths.
|
| These versatile, compact, low cost hydraulic shears are
equipped complete with 3 H.P. motor, self-contained hydraulic
power unit, motor starter, electric solenoid valve, foot switch,
stroke control, and heavy duty hydraulic cylinders. 16GA.
capacity in 36" & 52" cutting widths. |
 |
Gap Style Foot Shears
 |
These versatile, rugged, foot shears offer the added
features of slitting and notching. The 18" gap permits
slitting a sheet of any length, by successive cuts. Slitling
gauge, back gauge, front and side gauge are standard, along
with manually actuated cam holddown and finger guard.
Available in 16GA, capacity; in 36" & 52" cutting widths.
|
Foot Shears
 |
Standard equipment
- Tool steel blades.
- Gauges: front, back and side.
- 16 Gauge capacity
- 36" & 52" cutting widths
- Holddown, spring loaded.
- Lexan, finger guard.
- Support brackets.
- T-slots and hand slot.
|
Special Shears
If your problem is a special one-shearing a material
that you now feel must be cut by other means, fitting a shearing
operation to a new process, developing a shear specifically designed
to cut a new material-FAMCO is eager to offer a solution. FAMCO
engineers have the experience and know how to design and produce a
shear that will do an efficient job for you, whether the answer lies
in a minor revision of an existing model or involves a whole new
concept of shearing. Your problem may be solved by a special blade
opening, crosshead slope or stroke. It may require a special speed,
a different holddown device, or a new electrical circuit. Perhaps a
special grinding of blades-even special corrugated blades-will make
your operation more efficient and profitable. Whatever your
question, consult the acknowledged leader in the field of special
shears, and let FAMCO advise you.
 |
High Speed 10 gauge 60" wide cut-to-length line shear. Air
clutch, air-brake, DC control circuitry and 250 stroke per
minute operation make this shear ideal for high production,
accurate shearing.
Available in 16 gauge through 3/8 capacity, and 24" through
12 foot wide. |
| Special Gap Type Shear for plastic cut-to-length line.
Purpose of gap construction is to allow shear to move in and out
of extrusion line without disturbing material flow and to
facilitate initial threading of line. Shear cycles on stroke in
less than one second with explosion-proof electricals. |
 |
|
