Hossfeld Universal® Benders are the Original No. 1 and No. 2
Benders!
Enter Search Item:
Hossfeld Universal® Benders
are the Original No. 1 and No. 2 Benders for metal bending,
iron bending, wrought iron, auto work, and all your factory
and job shop bending needs.
ACCEPT NO IMITATIONS!
EASY TO INSTALL
SIMPLE TO OPERATE
RUGGEDLY
CONSTRUCTED
ECONOMICAL TO USE
VERSATILE
STANDARD DIES ARE
AVAILABLE
About Our Products
We manufacture the
following items:
No. 1
Bender - A smaller machine
ideal for hand operation
No. 2
Bender - A larger capacity
machine able to be equipped for power operation
Hydraulic
Power Attachment For No. 2 Bender
- Compact, auxiliary power unit makes heavy bends easy
No. 2
School Bender Package - For
Industrial and Vocational School Shops
Standard
Die Sets - Over 150
standard dies for all common bends
WITH
THE NO 2 BENDER:
YOU CAN BEND...
Pipe &
Conduit
Eye Bolts &
"S" Shapes
Angles and
Offsets
Heavy Cold
"U" Shapes
Sharp Square
Bends
Rings and
Coils
Sharp Right
Angles
Ornamental
Iron Work
Angle Iron
with Flanges
Flat Stock
Sideways
Notched Angle
Iron
Large
Diameter Rings & Eyes
Round or
Square Eyes
Reinforcing
Bar
Scrolls
Handrail
Capping
Electro
Metallic Tubes
Square &
Rectangular
Tube Bends
Edgebending
Handrail
Capping
Angle Iron
Heel Bends
Shear
Attachment
Flat Eye
Attachment
Bending 180
or Feed Along
Use Hydraulic
Attachment
HOSSFELD UNIVERSAL®
is a registered
Trademark
of
HOSSFELD MANUFACTURING COMPANY.
Get the one and ONLY
Hydraulic Attachment that is guaranteed!
Our products are available through
distributors. You can purchase a complete bender package,
including bender assembly, stand, video and operating manual,
to start your shop. Or purchase parts and dies to enhance an
existing unit.
Genuine Hossfeld
Universal® parts and dies are the ONLY parts guaranteed to
work with the Original No.1 and No. 2 Benders.
About Our Quality
We offer an affordable
solution for precision metal bending, ideal for your factory
or job shop.
Hossfeld Universal®
Benders and their Pipe and Tube bending dies have been
engineered to bend ASTM-listed Pipe and Round OD Steel Tubing
smoothly, without the
use of internal supporting mandrels,
and without surface blemish or distortion.
ASTM-listed Square
and Rectangular Steel Tubing can also be bent without
mandrels.
"Remember, ONLY the Hossfeld hydraulic attachment is
guaranteed to work with our benders!"
ACCEPT NO IMITATIONS!
Get the one and ONLY
Hydraulic Attachment that is guaranteed!
About Us
We have been
manufacturing and distributing benders since 1922.
The result of more than
seventy years
of progressive development and manufacture, HOSSFELD
UNIVERSAL® Benders have been favorites of Iron Benders,
because they are completely versatile, and set-up can be made
quickly and easily without tools.
They have a wide range
of capacity, and are simple, rugged machines that stand
years of use.
Size No. 2 "WRENCHLESS TYPE"
with Standard Equipment
Bending Pipe and Conduit
Bends Cold, all sizes of standard pipe and conduit up to 2" inside
diameter. Makes a smooth even bend without flattening the pipe or
splitting the seam. Bends to any degree or to a continuous coil as
desired. Bends to 10 " radius on the 2" size, down to a 2" radius on
the 1/4" size. Illustration shows a 1-1/4" standard pipe being bent
to a return bend on an 8" radius. (figure 1).
Bending Eye Bolts, "S" Shapes,
Etc.
Eye Bolt Bending Feature forms neat smooth Eye Bolts, 8" shapes, "U"
shapes, etc., of round or square stock up to 5/8", cold. By using a
wider Bending Dog and longer forming Pin, flat stock up to 1-1/2" in
width can be handled. With standard equipment, Eyes and "U's" can be
bent with 1/2", 5/8", 3/4", 7/8" and 1" inside openings. Special
bushings for bending larger than 1" eyes are available. Eyes
1-1/2" or 2" I.D. can be bent easily on 3/4" stock. (figure 2).
Bending Angles, Offsets, Etc.,
of Heavy Cold Stock
Bends Angles, Irregular Shapes, Offsets, etc., of round or square
stock up to
1-1/4", or of flat stock up to 4-1/2" x 1/2". Gauges are provided
for accurately locating the point of the bend and for gauging the
degree of the angle desired. Illustration shows apiece of 1-1/2" x
3/8" stock being bent to a right angle.
(Figure 3).
Bending Heavy Cold "U" Shapes
Bends "U" Shapes of 1-1/4" round or square stock, or of 4-1/2" flat
stock, cold. Self-locking Cam Shaped Dies for bending "U"s of
1-3/4", 2" and 2-1/4" inside spread are furnished with General
Purpose Dies. These Dies can be built up to any larger size desired
by simply bending a piece of flat stock around them. Illustration
shows a "U" bolt being bent. (figure 4).
Bending Sharp Square Bends on
Wide Flat Stock
Bends Sharp Bends to a right angle or less on 4-1/2" x 1/4" flat
stock, cold. This feature of the bender is used where a real sharp
corner bend is required. It can be used for making sharp offsets,
stake pockets, sharp cornered "U" clips, etc. Illustration shows a
piece of flat stock inserted ready for bending. (figure 5).
Bending Rings and Coils
Rings and continuous Coils of any desired diameter can be formed as
shown in the illustration. The Forming ring may be a short piece of
pipe of the right diameter or a 20B1 Bushing can be purchased from
our Parts Catalog. The stock is fed along a distance of 1" or 2"
after each pull of the hand lever. (figure 6).
Over 150 Standard Dies for All
Common Bends Available
m:
